Beijing, China
Business Type:
Number of Employees:
Plant Area:
12777.31 square meters
OEM/ODM Availability:
OEM/ODM Service
Sample Available

Crimping Machine, Hose Press Machine, Hydraulic Hose manufacturer / supplier in China, offering All Types of Hydraulic Hose Crimping Machines, Bsp, NPT, Jic, Ofrs, Metric Hydraulic Fittings, En 853 2sc Hydraulic Rubber Hose / Tube and so on.

Gold Member Since 2014
Audited Supplier
Supplier Homepage Products Hose crimper All Types of Hydraulic Hose Crimping Machines

All Types of Hydraulic Hose Crimping Machines

Get Latest Price
Min. Order: 1 Set
Port: Tianjin, China
Production Capacity: 6000 Sets Per Year
Payment Terms: L/C, T/T, Western Union
Condition: New
Customized: Customized
Automatic Grade: Both
Structure: Machine
Brand Name: Zmte
OEM: Yes

You Might Also Like


Basic Info

Model NO.: 06-150mm
Model Number: Anai-92s-a
Category: Crimping Machine
W. P. Application: 500bar
Trademark: ZMTE
Transport Package: Wooden Box
Specification: 1/4′′ to 4′′
Origin: Hebei
HS Code: 8501101000

Product Description

ANAI-92S-A Hose Crimping machine
Dear customers:
Thanks for choosing our products. Please read the specification so that you can work safely. We wish you work smoothly!
.Contents ......................................................................1
.Technical data ..................................................…4  
.Instructions for use and maintenance ...................5-6
VI. Maintenance and Notice...........................................7

   KM-92S-A manual hose crimping machine is our new product. Considering the non-convenience of working outdoor, our technologists developed this new portable type. This type machine absorbs the advantage technical in the world with using high quality material and ENERPAC hand pump so that the machine has a steady and permanent system.
 All Types of Hydraulic Hose Crimping Machines

1,Machine Head 2,Machine box3,Battery Case
4,Numerical Regulator5,Indicated Lamp6,Lamp Switch
7,Die Box 8,Hand Pump9,Unloading Valve
.Technical data
PumpManual pump
Systematic pressure35Mpa
Opening without diesΦ54mm
Hydraulic oilL-HM32
Crimper rangeΦ6~Φ25
Outside measurement305x370x270(mm)
Volume of oil tank328mL
.Instructions for use and maintenance
(I) Operation
1. Store the machine:When you open the package, please put the machine in the ventilation and dry house whose temperature is above 10 ºC.
2.Add the hydraulic oil: The oil port is on the oil box(nylon cover). Open the cover and add the hydraulic oil to the oil box as instruction in technical data.
3. Systematic pressure: The systemic pressure had been adjusted before the machine left out factory.You must not adjust it by yourself in case of damaging the machine.
4. Choose the dies: You should choose proper dies when you make hose assembly. NOTE: The number on the die is the min diameter of crimped.(the regulator is adjusted to zero)
5. Dies installation: The die is installed in the die base. Kindly change the dies like the photo shown:

6. Adjust the crimp size: Adjust the finally crimp size by Numerical Regulator. Turn the Numerical Regulator and the number be changed. At first, choose the suitable dies and then adjust Numerical Regulator.
Note: finally crimp size=die size+Numerical Regulator size.
E.g.: 14+2.5=16.5
  1. Crimped Operation: crimped as following:
Choose and install the suitable dies as per the crimping data
Adjust the numerical regulator as per the crimping data
Press the regulator lamp switch to make sure it on work
Screw down the unloading valve as per clockwise,clock the hydraulic outlet.
Put hose into the machine head,press hand pump till the lamp be on.
Anticlockwise loosen the unloading valve.The die open and put out the hose.
(II). Maintenance and Notice:
1. High strength screw in frond of the machine should be regularly tightened, requiring at least six months, tightening torque to 34 ± 8Nm. Overload to bad working conditions should reduce maintenance cycles.
2. The working surface of the machine should keep clean (If the machine was not used for a long time). You ought to inject enough grease lubricant before the machine operates.
3. You should ensure the oil clean, otherwise it will decrease the life of machine.
4. Check the bolts on the moving and pressing spares of machine.If the bolts is loosen, please screw again.
5. To keep the operation and life-saving, the machine should have a run-in time of two to three months. During this period,you should avoid crimping the hose which have four layers of steel wire and maximum inside diameter is 25mm.
6.Notice the clamp injury risk!!!
When machine is crimping, pls keep an enough safe distance between the crimping area and hold hose position, to avoid clip! While the machine is running, pls do not put your figures into the crimping head or into the dies base. 
7.After work, pls make sure the dies are back to the largest open position. Do not keep the dies and die base in the locked situation when shutting down for long time.
8.Do not let children touch the machine, in case accident,
9.Do not rinse the machine, especially the machine head parts.
10.ANAI crimping machines only can use the original factory design and manufacture dies. The dies provided by any third party, install and use on the machines are beyond the scope of the warranty. We will reject all warranty obligations and responsibilities. Any lose and risk by use third-party dies will be borne by the consumer.
14. The standard dies are not suitable for half crimping. If you need to do half crimping, please make a new die. Use standard dies for half crimping, the dies and machine will be broken. In this condition, we also repair the machine but cost extra.

Contact us for more information
All Types of Hydraulic Hose Crimping Machines

Send your message to this supplier

avatar Miss Vivi Zhu

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

People who viewed this also viewed